Perel CCTVSET10 Notice D'emploi page 9

11) Click SAVE. Click CLOSE in the confirmation window.
12) Click EXIT in all menus until all windows are closed.
Mask Field Setup
The Mask Field lets you block a specific portion of a channel you do not want recorded or shown on
the display screen. This can be useful if you need to conceal a sensitive area being captured by the
installed camera.
To use the mask field:
1) From the Record menu, click MASK FIELD SETUP. The Mask Field menu opens.
2) Choose a channel you wish to apply the Mask Field. Select ON from the SWITCH drop-down
menu.
3) Click SETUP. The Mask Menu disappears and the select channel is shown in full-screen.
4) Using the mouse, click and drag the cursor over the area you want to conceal. A single click will
produce a small black square.
5) Right-click anywhere on the screen to return to the Mask Field menu.
6) Click APPLY. Click SURE in the confirmation window.
7) Click EXIT in all menus until all windows are closed.
7.3.3 HDD
Displays essential information about the system`s internal hard drive, and lets you format the internal
HDD and external USB flash drive (not included).
The HDD menu displays the following:
• HDD STATUS: The system will display "OK" for normal operation
• SIZE: The size (in gigabytes) of the internal hard disk drive.
• FREE SPACE: The space (in gigabytes) remaining on HDD
• AVAILABLE TIME: The recording time (in hours) remaining on the HDD based on your current
record settings
• OVERWRITE: Select ENABLE or DISABLE. If overwrite is enabled, the system will record over the
oldest video data once the HDD is full. If overwrite is disabled, the system will stop recording once
the HDD is full and the live screen will show "H" symbol.
26/05/2011
CCTVSET10
9
©Velleman nv