Time Format - Perel CCTVSET10 Notice D'emploi

Formatting the Hard Drive
• Click on HDD FORMAT.
ATTENTION: Formatting the HDD will erase all video data. This step cannot be undone.
Formatting the USB Flash Drive
• Use a USB flash drive (not incl.) to backup recorded video and upgrade the systems firmware. You
should always format the USB flash drive you intend to use with the system.
NOTE: Not formatting the USB flash drive may result in improper functionality.
7.3.4 BASIC
Set the system language, date and time, passwords, and configure audio and display options.
The Basic Setup menu contains the following sub-menus: Language, Date/Time, Password, Display,
and Audio.
7.3.4.1 LANGUAGE
To change the system language:
1) From the drop-down menu select ENGLISH, or CHINESE.
2) Click APPLY. Click SURE in the confirmation window.
3) Click EXIT to close the menu.
NOTE: The device will restart when you finish system language setup.
7.3.4.2 DATA/TIME
It is highly recommended to immediately set the date and time when first setting up your system.
To set the date and time:
1) Click DATE/TIME and configure the following options:
o DATE: Enter the day, month, and year.
o DATE FORMAT: Select DD/MM/YYYY, MM/DD/YYYY, or YYYY/MM/DD
o TIME: Enter the time
o TIME FORMAT: Use the drop-down menu and select 12HOURS or 24HOURS
o DST: Use the drop-down menu to select ON/OFF to enable/disable Daylight Savings Time
26/05/2011
CCTVSET10
10
©Velleman nv