Ptz Control - Perel CCTVSET10 Notice D'emploi

8.2.1.2 SUB-MENU
Right-click any channel to open the sub-menu.
The sub-menu contains the following options:
• Open Window
• Close
• Open All
• Close All
• Start Record
• Stop

8.2.1.3 PTZ CONTROL

You must have a PTZ camera (not included) connected to the system in order to use the PTZ controls.
To control a PTZ camera:
1) Select the channel of the connected PTZ camera(s).
2) Click the navigation arrows to pan and tilt the camera. 3. Click + /- to control zoom, focus,
and iris.
3) Enter presets.
4) Click SETTING, CALL, and CLEAR to further control presets.
5) SET CRUISE: Set the parameter for loop function.
6) STOP CRUISE: Stop loop function.
8.2.1.4 SCREEN CAPTURES
Use the remote surveillance software to take a snapshot of the channels on the main display screen.
Screen Captures can be useful for your own records, or may be needed by authorities in case of a
security incident.
To take a screen capture:
1) From Live Viewing, select the channel you want to capture. The selected channel will be
highlighted in a red frame.
2) Click .
3) Click OK in the confirmation window. Screen captures are saved as .BMP files on the default
save location (C:\DVR\...).
26/05/2011
CCTVSET10
20
©Velleman nv