Stool Disposal; Equipment Description; Intended Use; Warranty - tecnodent StingST Mode D'emploi

1.7. S
TOOL DISPOSAL
Stool disposal doesn't present risk of any type.
For proper environmental safeguard, please deliver the stool, now out of order, to an authorized dump collecting recyclable and
non-recyclable materials.
2.1. I
NTENDED USE
The product described in this manual is a dental operator's stool. It is intended to comply with the general requirements of a
dental practitioner or his assistant. Considering the characteristics of such a device, it is possible to extend its use to anybody.
2.2. W
ARRANTY
The stool is accompanied by a Warranty Certificate. If there is no such certificate, it must be requested from the dealer
immediately, completely filled in and sent back to the manufacturer (Tecnodent) within 8 days from the date of delivery of the
apparatus. If this procedure is not observed, warranty conditions are not valid and the service technicians will be compelled to
charge entirely for all technical interventions possibly required.
NOTE.
Upholstery damage caused by contact with clothes or clothing accessories (ex: belts) having metal, sharp, pointed
or similar parts will not be replaced under warranty.
2.3. I
DENTIFICATION AND LABELLING
The stool identification label is found outside the stool under the base, where you can find the stool model, the serial number
and other information. Figure 1 shows the label position and a fac-simile.
FIG. 1
2.4. G
ENERAL FEATURES
This chapter offers a full view of the main features of the StingST and StingLE stools.
Moreover, the main stool components and their corresponding accessories are shown.
2.4.1. Description.
Perfectly symmetrical stool for use both on the right and on the left side of the patient chair.
Saddle seat, that allows a more comfortable operator position during work sessions.
Swivelling base, on 5 non-braked castors
Seat adjustable in height and, for the version with backrest, in tilt.
2.4.2. Accessories.
Your dealer is at your complete disposal for any information about functions and accessories which can be installed on the stool,
and which might not be described in this manual.
Height adjustable backrest.
The stool can be equipped from the factory with a height adjustable backrest, in order to obtain better lumbar support.
.

2. EQUIPMENT DESCRIPTION

.
.
.
.
– 13 –
Operating instructions