Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en
ENGLISH
Original instructions
1. Declaration of Conformity
Under our sole responsibility, we hereby declare
that these compressed air large diameter saws,
identified by type and serial number *1), meet all
relevant requirements of directives *2) and stand-
ards *3). Technical documents for *4) - see Page 3.
2. Specified Use
This air tool is suitable for work on auto body sheets,
for precise sawing of rails, beams, sectional sheets,
plastics, fibre glass, aluminium and wood in profes-
sional applications.
The air tool must only ever be operated with a
compressed air supply. The maximum supply
pressure specified on the air tool must never be
exceeded. The tool must not be operated using ex-
plosive, inflammable or hazardous gases. It must
not be used as a lever, crushing tool or striking
tool.
Any other use does not comply with the intended
purpose. Unspecified use, modification of the air
tool or use of parts that have not been tested and
approved by the manufacturer can cause unfore-
seeable damage.
The user bears sole responsibility for any damage
caused by improper use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must be
observed.
3. General Safety Instructions
For your own protection and for the
protection of your air tool, carefully
observe all parts of the text that are
marked with this symbol!
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety warn-
ings and instructions may result in electric shock,
fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Pass on your air tool only together with these docu-
ments.
- The user or user's employer must evaluate the
specific risks associated with each application of
the tool.
- You must read and understand the safety instruc-
tions before installing, operating, repairing or
maintaining the tool, and also before replacing any
accessory parts or carrying out any work in the
vicinity of the air tool. Failure to read and follow the
instructions may lead to serious injury.
- Only qualified, trained operators are authorised to
install, adjust or use the air tool.
10
- The air tool must not be modified. Any modifica-
tions implemented may reduce the efficiency of
the safety measures and increase risks for the
operator.
- Never use air tools that have been damaged. Look
after your air tools carefully. Regularly check that
all moving parts are functioning correctly without
jamming. Also regularly ensure that no parts are
broken or damaged to an extent that they affect
the operation of the air tool. Check that all signs
and labels are legible and intelligible. Have
damaged parts repaired or replaced before using
the tool. Many accidents are caused by poorly
maintained air tools.
4. Special Safety Instructions
4.1
Risks associated with ejected parts
- Disconnect the air tool from the compressed air
supply before replacing the mounted tool or
accessory parts, and also before carrying out
repairs or settings.
- If either the workpiece, accessory parts or the air
tool breaks, parts may be ejected at high speed.
- While operating, maintaining or repairing the air
tool, or replacing accessory parts, you must
always wear impact-resistant safety goggles. The
degree of protection required for each individual
task must be evaluated separately in each case.
- Ensure that sparks and swarf generated during
use are deflected to prevent any hazards.
- Ensure that the workpiece is securely attached.
- Ensure that the mounted tool is securely attached.
4.2
Risks associated with items catching
- Wear suitable clothing. Do not wear loose clothing
or jewellery. Keep hair, clothing and gloves at a
safe distance from the air tool and moving parts.
Loose clothing, jewellery or long hair may possibly
be caught in moving parts. There is a risk of injury
in this case.
4.3
Risks during operation
- Avoid any contact with the mounted tool to
prevent cutting your hands and other body parts.
- When using the air tool, the operator's hands may
be exposed to potential risk of cuts, abrasions and
heat damage. To protect your hands, wear suit-
able gloves.
- The operator and maintenance staff must be
physically capable of handling the size, weight
and power output of the air tool.
- Make sure you hold the air tool correctly: be
prepared to counter both routine and unexpected
movements, so keep both hands ready.
- Ensure you stand in a safe position and keep your
balance at all times.
- To avoid injuries caused by cutting or chopping,
do not touch the mounted tool until the
compressed air supply has been disconnected
from the air tool. Wear protective equipment such
as gloves, protective clothing and a safety helmet.
Publicité
Table des Matières
