Mounting Of Air Separator; Adjusting The Door Opening Angle (Refrigerator Compartment Door); Changing The Door Spring - Bosch B36ET71SNS Instructions D'installation

Insert the cover plate on the freezer compartment door.

21. Mounting of air separator

Using the air separator, air which is supplied and drawn from
the appliance is fed separately, in order to avoid reduced
operating capacity.
Shorten the air separator to the required length.
24
22. Adjusting the door opening angle
(refrigerator compartment door)
Depending on the installation situation, it may be necessary
to adjust the door opening angle. A door opening angle of
115° has been set at the factory.
To adjust the door opening angle to 90°:
Open the door to 90°.
Insert the banking pin through the boreholes which are
now vertically aligned and drive in with a hammer.

23. Changing the door spring

To adjust the door spring:
Rotate the adjusting screw with a cross-head
screwdriver.
I = maximum spring tension
0 = no spring tension