Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
« Modem Information » button
•
By default, the items entered are those defined during stage 2 « modem properties ». These parameters are
included in the ARF50.
Note: In certain configurations, it may not be necessary to initialise the modem. In that case, tick the «
disable modem configuration » box
An ARF50 configured in this way will have no associated modem.
« Trigger parameters » button (only for the «Trigger» mode)
(1)
•
Activate the trigger mode as required for each analog and digital input by clicking in the boxes to tick the
corresponding ones.
•
(2)
In the case of analog inputs, select the activation and deactivation levels via the or by entering the value
the value desired directly.
2
208009A-V1.3-UG_ARF50
(1).
1
1
42
Publicité
Table des Matières
