Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.3.2.02
•
General information: Select the category
modem version can be found on the label on the back of the modem)
•
Register parameters: Enter the transmission frequency
Note: the choice of these parameters will determine the Baud rate of the radio transmission (Baudrate) and
the time interval between each product interrogation (scanning period)
•
All fields must be completed. When all the parameters have been entered, the « finish » button becomes
active. Click to confirm the configuration (5)
1
When these 2 stages are complete, a window can be accessed that represents a complete system with the
number of products as previously determined.
At this stage it is possible to:
•
Add or remove modules in the system by clicking on « Add ... » (1) & « Remove ... » (2)
•
Modify the modem parameters by clicking on the « modem parameters » button (3)
The red cross (4) indicates that the system configuration has not been finalised.
•
4
1
2
3
208009A-V1.3-UG_ARF50
Define the properties of the modem ("modem properties" field)
(1)
and version
2
3
(2)
of the modem from the drop-down lists (The
(3)
and the power
(4)
from the drop-down lists.
4
5
38
Publicité
Table des Matières
