Configuration Procedure; Open The Configuration Software; Define The Operating Mode Of The System; Definition Of The Properties Of The System (« System Properties ») - Adeunis RF ARF50 Notice D'emploi

5.3.

Configuration procedure

Once the software has been installed, follow the steps described below.

5.3.1 Open the configuration software

Click on the « Create new system » button (or go to the « File » tab then « create new system »)

5.3.2 Define the operating mode of the system

5.3.2.01
• Name the system
• Choose the desired mode of operation: Mirror – Peer-to-peer – Trigger – Modbus
• Define the number of « masters » and/or « RF slaves » and/or « I/O expansions »
Note: Only the products necessary for the mode of operation previously chosen will be accessible.
• When all the parameters have been entered, click on « next » to confirm the configuration (4)
1
2
208009A-V1.3-UG_ARF50
Definition of the properties of the system (« system properties »)
(1)
3
(2)
4
(3)
37