Connect The Product To Be Configured; Configure The Products In The System; Select The Product To Be Configured; Enter The Product Serial Number - Adeunis RF ARF50 Notice D'emploi

5.3.3 Connect the product to be configured

• Switch on the product (terminal block PWR) – see § 3.3.Description of terminal blocks
• Connect the I/O module to the USB port of the configuration computer.
In the mirror and Peer to peer modes : first configure all the slaves (RF & expansion). The master can
then automatically recover all the serial numbers previously entered in the software.
In Trigger mode : connect first the "RF slave » then the various « Masters ». The serial number of the
"RF slave" will then be automatically recovered by the software and retransmitted to the « masters ».

5.3.4 Configure the products in the system

5.3.4.01
Double click on the flashing module to initialise product configuration.
5.3.4.02
• A search window appears with a list of serial numbers of the remaining available equipment.
• The software automatically recovers the serial numbers of all the products that can be connected to the
various USB ports of the computer.
• Select the serial number of the product to be configured (the serial number of the product can be found on the
label on the side of the enclosure) and confirm by clicking on OK. (2)
1
208009A-V1.3-UG_ARF50

Select the product to be configured

Enter the product serial number

(1)
2
39