Safety Instructions - Ferm CDM1118 Traduction De La Notice Originale

Cordless Li-Ion drill 12V
CDM1118/CDM1119
Thank you for buying this Ferm product. By
doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety.

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings,
the additional safety warnings and the
instructions. Failure to follow the safety
warnings and the instructions may result in
electric shock, fire and/or serious injury. Save the
safety warnings and the instructions for future
reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Risk of electric shock.
Variable electronic speed.
Rotation, left/right.
Do not use in rain.
Indoor use only.
Class II machine - Double insulation -
You don't need any earthed plug.
Max temperature 40
4
Additional safety warnings for drills
and screw drivers
a) Hold power tool by insulated gripping
Safety instructions when using long drill bits
a) Never operate at higher speed than the
b) Always start drilling at low speed and with
c) Apply pressure only in direct line with the bit
Battery tool use and care
a) Recharge only with the charger specified by
b) Use power tools only with specifically
C.
0
c) When battery pack is not in use, keep it
Do not throw the battery into fire.
Do not throw the battery into water.
Do not dispose of the product in
unsuitable containers.
Separate collection for Li-ion battery.
The product is in accordance with the
applicable safety standards in the
European directives.
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live"
and could give the operator an electric shock."
maximum speed rating of the drill bit.
At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting the
workpiece, resulting in personal injury.
the bit tip in contact with the workpiece.
At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting the
workpiece, resulting in personal injury.
and do not apply excessive pressure. Bits
can bend causing breakage or loss of control,
resulting in personal injury.
the manufacturer. A charger that is suitable
for one type of battery pack may create a risk
of fire when used with another battery pack.
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.