Micromega Minium AMP Notice D'utilisation page 14

CD
◊ The time that you continue to press the key
determines the speed of the search: for the first three
seconds the output volume is reduced after three
seconds the search speed is increased and the sound
is muted.
SCAN MODE (SCAN)
• Press the SCAN key in either Stop or Play mode.
◊ The SCAN indicator will illuminate and CD will now
play the first 10 seconds of each track.
• Should you find a track that you wish to play
completely, press the SCAN key again.
SHUFFLE MODE (SHUFFLE)
• Press the SHUFFLE key before or during Play.
◊ The SHUFFLE indicator will illuminate and CD will
now play each track in a random order.
• Press the SHUFFLE key to return to normal Play
mode.
A/B REPEAT (A / B)
• Press the A / B key while in play at the starting
point of the passage that you wish to repeat.
→
◊ A
will illuminate.
• Press again the A / B key at the final point of the
passage that you wish to repeat.
→
◊ A
B will illuminate and the selected passage will
continuously repeat.
◊ Press the A / B key to cancel the A/B mode.
REPEAT (REPEAT)
• Press the REPEAT key before or during Play.
◊ The REPEAT indicator will illuminate and the disc
will be repeated continuously.
• Press the REPEAT key again and the indicator
REPEAT 1 will illuminate.
◊ REPEAT 1 will indicate that the current playing
track will be repeated continuously.
• Press the REPEAT key to cancel the REPEAT
mode.
TIME INFORMATION (TIME)
• Press the TIME key during Play if you wish to
know the elapsed time since the beginning of the disc.
(TOTAL TIME).
• Press the TIME key again if you wish to know the
remaining time on the disc. (TOTAL REM TIME).
• Press the TIME key again if you wish to know the
remaining time of the playing track (REM TIME).
•
(TRACK TIME). is the default information mode.
• Press the TIME key again if you wish to return to
the default mode which is the elapsed time of the
playing track ( TRACK TIME ).
PROGRAMMING (PROG)
You may program a maximum of 20 tracks at any
time.
• Select the number of the track that you desire to
store by using the numeric keypad (0-9) or by using
the PREV/FREV or NEXT/FFWD keys.
• Store your choice by pressing the PROG key.
◊ Each time you store a track, the display will show
the number of stored tracks and the total time of this
selection.
• Press the PLAY/PAUSE key to start playing your
selection.
• When the selection has finished, press the
STOP/DISC key again to clear the selection.
DIGITAL OUTPUT (MODE)
You can activate the Digital output by pressing on the
MODE key. This is necessary if you wish to use a
separate Digital to analog converter or if you wish to
make a Digital recording.
◊ dO On is displayed when the output is activated.
◊ dO Off
is
deactivated.
This will be shown on the display for 2 seconds.
ABSOLUTE PHASE INVERSION ( Φ ).
This function is only accessible via the remote control
handset.
• One press of the Φ key while in play mode only will
invert the absolute phase condition.
◊ The display will indicate the status of the phase
mode : Ph 0 or Ph 180 and will revert back to normal
display mode after 2 seconds..
◊ The two dots of the display will blink in case of
phase reverse. Ph 180.
Note : When you change a disc the player will revert
automatically to the phase 0 position.
Note : Inverting the phase of the CD player allows
you to rectify any phase inversion elsewhere in the
reproduction process. It is important for accurate
reproduction of music to respect the correctness of
reproducing a recording of a pressure by the playback
of the equivalent and not by a depression.
Correct absolute phase shows up as better control
and more accurate attacks. It is recommended that
you try each disc of your collection and look for the
best reproduction based in the above mentioned
principles.
11
OPERATION
displayed when the
E
output is