Silk-n AUTOTWIST Mode D'emploi page 11

use the product simultaneously with these
EN
styling products.
5 Checking the product and package
contents
NOTICE! RISK OF DAMAGE!
• If you are not cautious when opening the
packaging with a sharp knife or other pointed
objects, you may quickly damage the product.
Be very careful when opening it.
1. Take the product out of the packaging.
2. Check to make sure that all parts are included (see Fig. A).
3. Check whether the product or individual parts are damaged. If
this is the case, do not use the product. Contact our Customer
Service.
6 Operation
• Clean all parts of the product before first use as
• The product may emit a slight smell when it is first
• Make sure your hair is clean, dry, combed and free
• Separate your hair into horizontal sections. Pin or clip
1. Connect the mains cord
socket.
2. To switch the product on, press and hold the on/off button
until one of the temperature indicators
sound is heard.
The product will heat up to the indicated operating
temperature.
11
described in the chapter "Cleaning".
used. This is entirely safe and harmless. Ensure there is
adequate ventilation in the room.
from styling or care products (except for heat
protection) before using the product.
the sections you are not working on out of the way.
to an easily accessible mains
10
6
flashes and a beep
8