Silk-n AUTOTWIST Mode D'emploi page 12

3. To select another operating temperature, press the
temperature control button
temperature indicator of the desired temperature setting
starts flashing.
Options for selection: 150 °C, 170 °C, 190 °C and 210 °C.
The product will remember your last selected temperature
setting for your next use.
Below are recommended settings. If you are unsure what
temperature to use, start with a lower temperature and
increase it as necessary.
Temperature Hair type
150 °C
170 °C / 190 °C Normal hair
210 °C
4. Wait until the indicator of the selected temperature setting
stops flashing. The product is now ready for use.
5. Take a hair strand of 1–3 cm in width.
When working with naturally curly or longer length hair, use
smaller sections. Also, for tighter curls use smaller sections, for
looser curls and waves use larger sections.
6. Lay the hair strand in the curling chamber
opening (see Fig. B).
3
Follow below instructions to style the left side of the hair. To
style the right side of the hair, do the opposite.
If you want to curl the hair strand inwards, lay it to the left side
of the curling barrel
If you want to curl the hair strand outwards, lay it to the right
side of the curling barrel (see Fig. D).
7. Let go of your hair strand.
8. Press and hold the left rotation button
or right rotation button
The curling barrel will start to rotate in the selected rotation
direction for about 9 seconds. The hair strand will be wound
around the curling barrel (see Fig. E).
9. Once the curling barrel has stopped after around 9 seconds,
you will hear 6 beep sounds. Release the rotation button.
10. When the last beep sound has stopped, gently pull the
product away from your head so that the hair strand slips out
of the curling chamber.
repeatedly until the
7
Fine, damaged or chemically treated hair
Thick, curly, not chemically treated hair
(see Fig. C).
2
(for outward curls).
5
through the
1
(for inward curls)
4
EN
12