Upper basket in the high position
In this setting, the basket is suitable for
small and medium kitchenware, such as
glasses, small plates, cups, basins and
light plastic objects which are heat-
resistant.
Upper basket in the low position
In this setting, the basket is suitable for
large plates (which are not too dirty).
Loading the top basket
Stack the plates with the top side facing
forwards.
Stack cups and bowls or dishes with the
opening down.
On the left-hand side of the basket – at two
levels – you can place cups and glasses.
You can flip the upper draining racks
upwards.
Loading the lower basket (see fig. 9)
Like the upper basket, the lower basket can
be completely pulled out by first fully
opening the door.
Place soup, flat and dessert plates, pans,
lids and saucers in the lower basket.
Place plates with their top side facing
forwards, or towards the middle. Make
sure that there is always space remaining
between the plates, so that the water can
flow freely over them.
Place bowls and pans with the opening down.
Cutlery container (see fig. 10)
The cutlery container is suitable for all
types of cutlery.
In the cutlery container, place the knives,
forks and spoons with their handles
downwards.
Always check whether or not the spray
arms can rotate freely.
fig. 9
fig. 10