Pelgrim GVW835E Notice D'utilisation page 32

Rinse-aid
A
Open the rinsing agent reservoir (see fig. 5)
on the inside of the door, next to the
detergent reservoir.
The means of operation will depend on the
type of dishwasher: the containers all work
on the basis of the same principle.
Unscrew the lid of the rinse-aid reservoir in
an anti-clockwise direction.
Pour rinse-aid into the container and then
close it again.
The container has a capacity of 140 cc.
Every now and again check the level of the
rinse-aid.
The level gauge (A) is located to the upper
left of the lid.
Reservoir empty: .
!
Reservoir full: .
c
The correct quantity of rinse-aid per
washing cycle is adjustable.
Turn the knob (B) in the container to the
desired setting (C). The amount of rinse-aid
is in proportion to the numbers on the knob.
– Increase the amount (choose a higher
number):
B
Washed kitchenware is dull or flecked as
a result of dried drops of water.
C
– Reduce the amount (choose a lower
number):
fig. 5
Washed kitchenware is sticky or has
whitish streaks.
Remark:
As standard, the rinse-aid reservoir is set to
an average dose.