EN
SICO KITCHENWARE® NATURAL LABORATORY FOR VACUUM PACKAGE
MAINTENANCE OF THE PUMP PROTECTION FILTER
S250Premium is equipped with a yellow foam filter protecting the pump from dust and/or possible liquids which
could be accidentally sucked. It is advisable to control its cleaning state periodically.
The whole filter is extractable. If its extraction should be necessary for its
procedure:
Unplug vacuum packer and place it on a plane and firm working surface;
Remove the lid of the filter by paying attention not to lose the rectangular rubber gasket;
Pull the filter out energetically by paying attention not to lose the two small gaskets below and clean the filter with
water and mild soaps;
Insert the filter with the lid again in its place by pushing energetically.
Before leaving the production laboratory, our appliances are submitted to severe checks and tests. BISVA SRL
will reserve the authority to introduce any technical and structural change it will consider necessary, without any
obligation of notice.
This equipment is covered by a 2-year warranty starting from the purchase date, which has to be proven by means of the
stamp or signature of the dealer and by the fiscal payment receipt that shall be kept enclosed to this document. This warranty
period complies with the laws in force and applies only in case the consumer is an individual. Bisva Srl products are
designed for domestic use only; therefore, their use for commercial purposes is forbidden. The warranty covers only
production defects and does not apply, if the damage is caused by accidental events, misuse, negligence or improper use of
the product. Use the supplied accessories only; the use of other accessories invalidate the warranty cover. Do not open the
equipment for any reason whatsoever; the opening or the tampering of the equipment, definitely invalidate the warranty.
Warranty does not apply to parts subject to tear and wear along the use. Warranty decays after 2 years from the purchase
date.. In case of faults, refer to the dealer; DO NOT send anything directly to Bisva Srl. All interventions covered by
warranty (including product replacement or the replacement of any of its parts) shall not be meant to extend the duration of
the original warranty period of the replaced product. The manufacturer cannot be made liable for any damages that may be
caused, directly or indirectly, to people, things and pets resulting from the inobservance of the provisions contained in the
suitable user manual, especially with reference to the instructions related to installation, use and maintenance of the
equipment. Being constantly involved in improving its own products, Bisva Srl reserves the right to modify its product,
totally or partially, with reference to any production need, without that this involves any responsibility whatsoever by Bisva
srl or its dealers.
Disposal: In conformity with Directive 2002/96/EC, the symbol shown on the appliance to be disposed of indicates that this is
considered as waste and must therefore undergo "sorted waste collection". The user must therefore take (or have taken) the
above waste to a pre-sorted waste collection centre set up by the local authorities, or else give it back to the dealer when
purchasing a new appliance of the same type. Pre-sorted waste collection and the subsequent treatment, recovery and
disposal operations favour the production of appliances made of recycled materials and limit the negative effects of any
incorrect waste management on the environment and public health. The unlawful disposal of the product by the user could
result in administrative fines as provided by the laws transposing Directive 2002/96/EC of the European member state in which
the product is disposed of.
MANUFACTURER : BISVA SRL TITO PZ ITALIA
TECHNICAL FEATURES:
S250 PREMIUM SV
SEALING BAR
SEALING
SUCTION
AUTOLUBRICATING PUMP
VACUUM VALUE (APPROX)
VOLTAGE
DIMENSIONS
POIDS
LIMITED WARRANTY
2x250MM
AUTOMATIC / MANUEL
AUTOMATIC
20LIT . /MIN (APPROX)
ADJ.UP TO -0,9 BAR
220-240V 50Hz
370mm x 255mm x 115mm
4.5 kg
WWW.BISVA.IT
better cleaning, please follow this
INFO@BISVA.IT
EN
8