EN
SICO KITCHENWARE® NATURAL LABORATORY FOR VACUUM PACKAGE
10
11
15
5
12
General switch: if it is lighted, it indicates that the appliance is on and ready to be used.
1.
2.
Sealing time: it allows to set up the sealing time depending on the thickness of the bag
to be sealed.
Sealing indicator light: when the light is on, the packer is sealing a bag. When the light
3.
goes out, the sealing process is finished.
Vacuum gauge: it measures vacuum value.
4.
Jars/Bags Selector: it allows to program the packer to vacuum pack in Bags (Position II)
5.
or in Jars (Position I).
Auto/Man selector: If the selector is set on the AUTO position, the sealing process will
6.
be automatic. If it is set on the MAN position, it will be necessary to start up the sealing
manually
Sealing start button : manual sealing
7.
Upper airtight basket:. it guaranties that vacuum will be maintained in the chamber.
8.
Lower airtight basket: it guaranties that vacuum will be maintained in the chamber.
9.
10.
Silicone gasket: it presses the bag on the sealing bar.
Lid
11.
12.
Sealing bar: When the light is on, the sealing bar is sealing bags. Avoid touching the bar
after sealing to prevent burnings.
Pump protection filter: the filter gathers possible liquids and/or dust which could damage
13.
the pump. It can be drawn out, cleaned and inserted properly.
Plastic bracket: it is used to stop the bag during vacuum process. It is extractable to
14.
cleen vacuum chanber
Accessory port.
15.
3
MANUFACTURER : BISVA SRL TITO PZ ITALIA
6
5
7
13
LEGEND
WWW.BISVA.IT
14
4
1
3
2
INFO@BISVA.IT
EN
8
9