Bags Care; Vacuum Packing In Containers; Accessories Care - Kitchenware S250 Premium Manuel D'utilisation

EN SICO KITCHENWARE® NATURAL LABORATORY FOR VACUUM PACKAGE
Before buying bags, make sure of their suitability to vacuum preservation. S.I.C.O. KITCHENWARE® assures
the suitability of its items to vacuum preservation. It is essential to take great care of the bags used before and
after vacuum-packing. Accidental piercing would make these bags useless. When vacuum-packing food with
points or acuminated protrusions, remember to wrap it in soft paper napkins and/or silver paper so as to protect
the whole bag. It is advisable to keep them far from children.
S.I.C.O. KITCHENWARE® offers different lids which allow to vacuum-pack by using containers characterized by
the capacity you need. Apart from the lids, you need another accessory called "vacuum handle". Remember not
to fill the container and leave 3 cm. at least from the upper rim
WARNING: USE STEEL CONTAINERS ONLY BECAUSE THEY DO NOT IMPLODE UNDER
THE DEPRESSION CAUSED BY THE VACUUM PUMP.
Step 1
. Plug the
appliance in, lift the
lid (11) and position
the general switch
(1) on position ON.
Put the handle pipe
into the proper
accessory port (16).
Check the presence
of the silicone valve
on the lid.
All accessories must be cleaned carefully before being used. It is advisable to use warm water and mild
dishwashing soap.
MANUFACTURER : BISVA SRL TITO PZ ITALIA

BAGS CARE

VACUUM PACKING IN CONTAINERS

.
Step 2
Program the
selector (5) on position
JARS to vacuum-pack
containers. The pump
will be set in motion.
Insert the handle on the
lid and press.
Vacuum Handle

ACCESSORIES CARE

.
Step 3
When the vacuum
gauge (4) reaches the MAX value, it
will be possible to remove the
vacuum handle from the lid. It is
possible to go on sealing
positioning the selector (5) on 0 to
switch the pump off.
WWW.BISVA.IT
.
Step 4
To
vacuum-packing
use your fingers to remove
the silicone valve
where you had inserted the
or
handle to vacuum-pack so as
to allow the entry of air and
the opening of the lid. Always
leave the valve o the lid.
.
INFO@BISVA.IT
EN
open a
container,
placed
6