Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
SICO KITCHENWARE® NATURAL LABORATORY FOR VACUUM PACKAGE
The vacuum preservation technique does not replace the fridge or the freezer. It is necessary to use bags,
containers, lids suitable to vacuum packaging. When using bags to vacuum pack products with sharp corners or
points, remember to protect them with soft cushioning materials such as paper napkins, silver paper, to prevent
protrusions from piercing the bag. Fragile and soft products must be vacuum-packed in containers to prevent
them from being crushed as it would happen in case they were packed in bags. When using accessories,
remember not to fill the containers to prevent overflowing.
CORRECT USE OF THE PRODUCT
This appliance is intended for vacuum packaging according to the descriptions and instructions contained in this
manual. Any other use is regarded as incorrect and, as a consequence, dangerous. The producer cannot be
considered responsible for possible damages due to incorrect and wrong usage. You are requested to read this
manual carefully and to keep it handy for future reference. Follow this detailed procedure that shows you how to
use "S250 Premium" .
HOW IT WORKS WITH EMBOSSED BAGS
On the market it is possible to find different kinds of bags intended for the vacuum preservation of food. The
dealer must guarantee that these are embossed bags intended for vacuum packaging. We suggest choosing
S.I.C.O. KITCHENWARE® products and accessories.
Step 2
Step 1.
Position
the appliance on a
sealing
plane and strong
according
thickness of the bags
working
surface.
used. It is advisable
Plug the appliance
to set up high values
in, lift the lid (11)
at the beginning and
and
position
the
then
general switch on
position I(1).
opportunely
prevent the packer
from melting and/or
cutting the bag.
S250 PREMIUM
Step 6a.
.
Lower the lid (11) and
press
on
the
PUSH/PREMERE. S250 Premium is
equipped with a patented system of
magnets that allows to release the lid
immediately. The vacuum packer will
proceed to suck the air contained in
the bag.
MANUFACTURER : BISVA SRL TITO PZ ITALIA
REMEMBER THAT:
DON'T SUCK LIQUIDS
.
Set up the
Step
time
(2)
Program selector
to
the
(5)
on
BAGS
position
vacuum-pack
bags.
reduce
them
to
S250 PREMIUM
Step
7
.
words
vacuum gauge (4) reaches
the
MAX
machine proceeds to the
sealing automatically. At
the end of the process, the
sealing indicator light (3)
will turn off.
Step 5.
Step
4..
3.
food to be vacuum-packed. Insert the bag into the
Program selector
vacuum chamber under the plastic bracket (15), the
(6) on position
bag must be well laid on the sealing bar. Be careful
AUTO
for
to
not to dirty the area of the bag intended for the
automatic cycle
.
sealing. Leave the bag empty for at least 5 cm.
Step
7*.
selector (6) is set on
the
MAN
when
the
When
the
gauge (4) has reached
the MAX value it will
value,
the
be necessary to start
the sealing manually
(7)
WWW.BISVA.IT
Choose a bag whose size is suitable to the
If
the
Step 9
position,
.
Lift the lid, check the
vacuum
homogeneity
of
preserve the package from casual
piercings that would cause the loss of
vacuum.
INFO@BISVA.IT
EN
the
sealing
and
4
Publicité
Chapitres
Table des Matières
