Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6 Storage
Before the KITE is put away it should be completely dry. Store the KITE in a clean area.
The storage temperature should be between -10 °C and +40 °C. The humidity content
must not exceed 80%. Do not store any dirty filters with the KITE in the same area. The
shelf life for the filters is indicated on the filter itself.
7 Faults, troubleshooting and repair
Warning: In case of doubt concerning the proper functioning of the product, please
contact the supplier or Arbin Safety Products.
Problem
KITE beeps every second
KITE beeps every 30 seconds
KITE does not produce any air
KITE supplies insufficient air
Battery discharges too quickly
8 Technical specifications
KITE
•
EN 12941, class TH2P
•
EN 166, class B medium impact
•
Airflow: 160 litres /minute
•
Operating time: approx. 7 hours
•
Filters: 1
•
Weight: 810 g, excluding filter
•
Dimensions: 400 x 220 x 220mm
Battery
•
Type: Li-Ion rechargeable
•
Charging time: 4 hours max
•
Charging cycles: at least 500
Reason
Filter clogged
Battery empty
Switch is turned off
Motor is defective
Electronic problems
Battery empty
Battery is almost empty
Filter is clogged
Charger defective
Battery defective
KITE Welding/Opti
•
EN 12941, class TH2P
•
EN 166, class B medium impact
•
EN 169, 170
•
Airflow: 160 litres/minute
•
Operating time: approx. 7 hours
•
Filters: 1
•
Weight: 990 g, excluding filter
•
Dimensions: 400 x 240 x 220 mm
Battery charger
•
Type: Fully automatic
•
Weight: 100 g
•
Dimensions: 80 x 80 x 45 mm
•
IP class: IP 20
14
Solution
Replace filter
Charge battery
Turn switch on
Return to dealer
Return to dealer
Charge battery
Charge battery
Replace filter
Use new charger
Return to dealer
Publicité
Table des Matières
