Varan VAR-MIGMMA160 Manuel D'utilisation page 24

(9) Welding cables : regularly inspect their connections
(10) Torch: regularly clean the contact tip and shroud to remove spatter that will eventually disturb the gas
flow of wire feeding, spraying the tip and shroud with anti-spatter spray can reduce the buildup of spatter
. Replace the tip periodically to maintain a good electrical contact between the tip and the wire. Blow
clean dry air through the torch liner from time to time to ensure the wire passes freely through it. If this
has does not work, the liner should be replaced.
Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg T: 00352/26908036 – F: 00352/26908040
VAR-MIGMMA160
VAR-MIGMMA200