Main Features - Varan VAR-MIGMMA160 Manuel D'utilisation

The connection as mentioned above is DCEP connection. Operator can also choose DCEN connection
according to the nature of work-piece and electrode rod by connecting electrode holder and earth
clamp reversely. (Electrode holder to "-", earth clamp to "+") .Generally, DCEP connection is
recommended for basic electrode, while no special requirement for acid electrode.
Note: Select appropriate current and voltage according to the nature of material and diameter of
electrode rod. (See below reference diagram)
Reference Table of Welding Current Setting
Electrode
dia.(mm)
1.0
1.6
2.0
2.5
3.2
4.0
5.0
6.0
Note: This table is suitable for mild steel welding. For other materials, consult related materials and
welding process for reference.

MAIN FEATURES

1.This highly developed multifunctional welder is suitable for electrode arc welding ,flux cored wire
welding (no gas ) and solid wire welding (with gas)
2.Be able to work continuously and can balance automatically when voltage is waving.
3.adopt inverter IGBT technology, DC output current .portable design .with handle
4.Energy saving, high efficiency ,fan cooled
5.Precise control of current, voltage and wire speed.
6.Overload protective circuit ，anti-static protection
7.Stable arc, little spatter, advance arc force and arc-starting function to resist interference.
8.230V,±10%.single phase,50/60Hz
9.Compete with MIG welding torch , electrode holder ,earth clamp , face mask , hammer
Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
Recommended
welding
current (A)
20~60
44~84
60~100
80~120
108~148
140~180
180~220
220~260
T: 00352/26908036 – F: 00352/26908040
VAR-MIGMMA160
VAR-MIGMMA200
Recommended
welding
voltage (V)
20.8~22.4
21.76~23.36
22.4~24.0
23.2~24.8
23.32~24.92
24.6~27.2
27.2~28.8
28.8~30.4