Operation Tips - Varan VAR-MIGMMA160 Manuel D'utilisation

OPERATION TIPS

• Press the trigger and when the arc strikes , slowly move the torch in the desired direction
• If the arc produces a humming sound and a blob forms on the end of the wire, there is insufficient wire speed
and it should be increased. If an erratic sound is given with a feel that the wire is stubbing against the work and
excessive spatter, there is too much wire speed, When the speed is correct there will be a steady smooth
crackling sound. If a porous weld results there is insufficient gas flow and it should be increased.
Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg T: 00352/26908036 – F: 00352/26908040
VAR-MIGMMA160
VAR-MIGMMA200