CYBEX Hubble Air Guide Utilisateur page 12

EN
In order to fix the crib to the parents bed (sleeping together function) use the pair of straps deliv-
13-14
ered with the crib. Fix the buckles underneath the fabric lining on both sides.
Afterwards fix the belt around the structure of the parent´s bed, from the bottom towards the top
and fix the buckle to form a sling. Same thing on other side.
At this point, move the crib to the side of the parent´s bed and tighten the sling by pulling the
belts tight. Do this operation for both sides. Adjusting the belts until the crib is firmly in contact
with the parents mattress.
WARNING: before every use always check to make sure that there is no space between the
parent´s mattress and the side of the crib. If there is, pull the belts tight until there is no space
anymore.
If while fixing operations of the crib next to the parent´s bed it is not possible to glide the feet of
the crib under the parent´s bed, it is still possible to mount the crib.
Push the button on the feet in, in order to shorten the feet to the needed length.
WARNING: Use of the product is only permitted with beds and/ or matresses with straight sides.
Use of the product with round beds and/ or water beds is not allowed.
WARNING: When the product is used in the sleeping together function, assembly to the bed
should always be fitted to the long side of access to the bed.
DO NOT put the product to the head or bottom of the bed.
The crib can be adjusted into different height positions. In order to adjust the height, push the
15
adjustment button upwards and lift the crib to the desired position.
Do this operation on both sides. The height can be changed into 11 different positions.
WARNING: the crib can be slanted with a maximum variance of 2 positions between one leg and
the other. The head of the child should always be positioned on the highest point.
The crib can be fully disassembled in order to store it in the bag supplied with the crib. In order
16
to disassemble the product, repeat the operations described in points 1-8- Then unfasten the
central support structure by pressing the fastening pins on both cribs legs.
The bed is completely dis-assembled and can fit into the transportbag for easy storage and
20
transportation.
Important — Keep these instructions for future reference.
Warnings, safety instructions, maintenance, disposal and guarantee can be found in the warnings
booklet.
12
INSTRUCTIONS