CYBEX Hubble Air Guide Utilisateur page 11

Please open the central tubings. Push one leg to the left the other one to the right.
1
Until the body stands itself.
Fit in the central supporting structure. Therefor fix the central supporting structure to the legs,
2
inserting the tubing of the central support structure into the plastic parts as illustrated in figure
b. Push it downwards until you hear a CLICK of correct fixation.
Please do this for both sides.
Fix the fabric lining to the upper tubular structure with the help of attached zipper.
3
Close the zipper around the tubing on front- and back- part like shown in the pictures (b) and (c).
Fix both fabric flaps left and right with the help of Velcro around the upper tubing. Close the 4
4
pressbuttons on the bottom of the fabric construction around the central structure tubing in
order to fix the fabric construction on the bottom.
Close the zipper in the corner for final fixation of the fabric around the tubings on both sides.
5
Put in the mattress.
6
Turn the crib around.
7
WARNING: Check to make sure the crib, in the sleeping together mode does not interfere with
8
the parents bed.
WARNING: During use, make sure that the parents bed sheets, blankets etc. do not cover the
interior of the crib.
Open the side of the crib parentbed facing, using the side zips and open them completely on
both sides.
Pull the upper part of the tubings out and slightly push it down.
9
The crib is now open on one side. Take care the side support is in right position.
10
WARNING: use the crib with the tube lowered, only in sleeping together function.
Move the crib close to the parent´s bed and check the height of the crib compared with the
11
mattress of the parents bed. WARNING: the height of the parents mattress should always be more
than that of the side support of the crib. WARNING: in the sleeping together function, the 2 legs
of the crib should always be adjusted to the same height.
The crib can be fixed to the parent´s bed. This way to use it, is only possible with bed types that
12
comply with all of the conditions described in this section.
In particular the side support of the crib should always be put as close as possible to the parent´s
mattress. The mattress should always be aligned with the height of the side support for restraint
of the crib.
Furthermore, the crib should be stable fixed to the structure of the parents bed or the mattress
support.
INSTRUCTIONS
EN
11