Program Table - CONTINENTAL EDISON CE TV LCD 22FHDV3 Mode D'emploi

Band
Band can be selected either C or S. Press " " or "
" button to set Band.
Channel
Channel can be changed by " " or " " button or
numeric buttons.
Colour System
Press " " or " " button to select Colour System.
Use " " or " " button to change the colour system to
AUTO, PAL or SECAM.
Sound System
Press " " or " " button to select Sound System.
Press " " or " " button to change the sound system
to BG,DK, I, L or L'.
Fine Tune
Press " " or " " button to select Fine Tune. Press "
" or " " button to adjust the tuning.
Search
Press " " or " " button to select Search. Use " "
or " " button to start programme searching. You can
also enter the desired frequency using the numeric
buttons while Search item is highlighted.
Store
Press " " or " " button to select Store. Press " "
or OK button to store the settings. "Stored..." will be
displayed on the screen.

Program Table

Select Program Table by pressing " " or " " button.
Press " " to display Program Table:
By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except for the
AV modes). By cursor action, programme selection is
done automatically.
Name
To change the name of a programme, select the
programme and press the RED button.
The first letter of the selected name will be highlighted.
Press " " or " " button to change that letter and " "
or " " button to select the other letters. By pressing
the RED button, you can store the name.
Move
Select the programme which you want to move by
navigation buttons. Press the GREEN button. By
navigation buttons move the selected programme to
the decided programme space and press the GREEN
button again.
Delete
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the
selected programme from the programme list, and
the following programmes shift one line up.
APS (Auto Programming System)
When you press the BLUE button for starting automatic
tuning, Auto Programming System menu will appear
on the screen:
Press " ", " " button to select your country. If you want
to exit from A.P.S. function, press the BLUE button.
When you press OK or RED button for starting
automatic tuning, all stored programmes will be erased
and the TV will search for available channels. During
the search, the following OSD will be displayed:
Whenever you press the BLUE button, APS function
stops and Program Table appears on the screen.
If you wait until the end of APS, Program Table will be
displayed with the programmes found and located.
English - 66 -