J1158741-95,BB2250_English.fm Page 5 Monday, November 21, 2016 10:44 AM
For safe operation and maintenance, symbols are carved in
relief on the machine. Using to these indications, please be
careful not to make a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
(b) The direction to close the choke
Position: CLEANER BODY
*1: THE ACTUAL MANUFACTURING MONTH WILL BE
PRINTED.
A: MODELL
B: ENGINE
FAMILY
BB2250
9HQZS.0505BP*
*2: THE INITIAL CODE WILL BE CHANGED EVERY YEAR OF
MANUFACTUREING
WARNING
1. Read this Blower Operator Manual carefully. Be sure
you understand how to operate this unit properly before
you use it. Failure to do so could result in serious injury.
2. Be sure to keep this manual handy
so that you may refer to it later
whenever any questions arise. Also
note that you are requested to
contact the dealer from whom you
purchased the product for
assistance the event that you have
any questions which cannot be
answered herein.
3. Always be sure to include this manual when selling,
lending, or otherwise transferring the ownership of this
product.
4. Do not lend or rent your machine without the owner's
manul.
5. Be sure that anyone using your unit understands the
information contained in this manual.
6. Never let a child use the machine.
Symbols on the machine
(a)
(b)
<For EPA & CARB>
EMISSION CONTROL INFORMATION
HUSQVARNA AB HUSKVARNA SWEDEN
THIS ENGINE MEETS U.S. EPA AND CALIFORNIA
EXH/EVP REGS FOR
ENGINE FAMILY :
EMISSION CONTROL SYSTEM :
COMPLIANCE PERIOD :
MANUFACTURED :
REFER TO OPERATOR'S MANUAL FOR MAINTE-
NANCE, SPECIFICATIONS AND ADJUSTMENTS.
C: ENGINE
DISLACEMENT
2
50cc
Safety Precautions
(c)
(d)
(c) The direction to open the choke
Position: CLEANER BODY
(d) The direction to stop the engine
Position: CONTROL HANDLE
A
S.O.R.E.
B
DISPL.:
C
EXH;EM/EVP;SP
300 HOURS
1
Jan. 2010*
This engine label certifies that the product is certified in accordance with
American exhaust emissions requirements EPA Ph III and Californian
exhaust and evaporative emissions requirements CARB Tier III. The
Emissions Compliance Period referred to on the emissions compliance
label indicates the number of operating hours for which the engine has
shown to meet Federal and Californian emission requirements.
7. Long-term exposure to noise can result in permanent
hearing impairment. So always use approved hearing
protection.
8. Under no circumstances may the design of the machine
be modified without the permission of the manufacturer.
Always use genuine accessories. Non-authorized
modifications and/or accessories can result in serious
personal injury or the death of the operator or others.
9. A blower is a dangerous tool if used carelessly or
incorrectly and can cause serious, even fatal injuries. It
is extremely important that you read and understand the
contents of this Operator's manual.
10. Jonsered has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
11. The machine is only designed for blowing lawns,
pathways, asphalt roads and the like.
English
6