Adjusting Idle Speed; Stopping Engine - Jonsered BB2250 Manuel D'utilisation

J1158741-95,BB2250_English.fm Page 14 Monday, November 21, 2016 10:44 AM
English

ADJUSTING IDLE SPEED

• The idling speed is set for 2000 rpm at the factory. If it is necessary to adjust the idle
speed, use the adjustment screw on the top side of carburetor.
(1) Idling Adjustment Screw

STOPPING ENGINE

• Move the throttle lever to the idling position and set the stop switch to the stop
position.
(1) Stop switch
NOTE
If the engine does not stop when setting the stop switch to the stop position,
close the choke lever and stop the engine.
In this case, please repair the machine at your nearest servicing dealer.
(1) Choke Lever
(2) OPEN
(3) CLOSE
15
Operation
F10
F11
F12