Tanita InnerScan Body Composition Monitor BC-590BT Mode D'emploi page 6

Operation with Bluetooth (Using Guest Mode) continued
8) The result will show after measurement is completed,noted by a double beep.
The data will then be sent to the corresponding Bluetooth device.
To See other readings, carefully step off scale, press the up button continually to display readings in the order
listed below. ( Press the down button for reverse. )
The Up / Down buttons will not function while remaining on scale.
Weight
Body Fat %
Body Water %
Mascle Mass
Physique Rating
9) The scale will automatically shut off when ---
*The user remains on the scale for 30 seconds.
*The user get off from the scale, and then after 30 seconds.
8
Visceral Fat
Bone Mass
Metabolic Age
DCI
Error Process (Using Personal key & Guest Mode)
1) Failure to "PAIR" message
a)
If appears, proceed to the next step.
2-a) If using Personal key : All the Pre-stored personal data will be displayed one by one.
2-b) If using Guest Mode : Set Age, Select Female or Male ( Standard or Athlete ), specify the height and the
select activity level. All the Pre-stored personal data will be displayed one by one.
3) The unit will beep again and the display will show " 0.0 ".
Now step onto the platform.
4) The complete measurement as noted by a double beep.
*The result data will not be sent to the corresponding Bluetooth device.
5) The scale will automatically shut off when ---
*The user remains on the scale for 30 seconds.
*The user get off from the scale, and then after 30 seconds.
b)
to
If to appears, the scale will automatically shut off.
This is a result of a problem with the Bluetooth device in the scale.
Please contact TANITA.
9