Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
14. APPENDICES
APPENDIX 1 : PP30 PIN-PAD ACCESSORY
PP30 PIN-PAD
Installing the shield:
To install the shield, clip the 4 embossed lugs into the corresponding 4 recesses.
Position the shield in front of the PINPAD.
To make for easier insertion,
slightly squeeze on the tops
of the side panels.
Gently push the shield until it clips into the 4
points.
Opening/disassembly of the terminal
Any attempt to open or disassemble the terminal will render it unusable.
Be careful not to disassemble the terminal.
Physical Characteristics
Mass
Dimensions
Cable length
Operating conditions
Ambient temperature
Max relative humidity.
Storage conditions
Storage temperature
Max relative humidity
4 navigation keys
F key
Red key
Yellow key
Green key
:
approximately 185 g
:
approximately 159 x 90 x 73 mm (L x l x h)
:
approximately 1,1 m
:
from +5°C to +45°C
:
85% at +40°C
:
-20°C,
+65°C
:
95% at +55°C
page 35 / 40
:
FUNCTION key
:
CANCEL key
:
CORRECT key
:
VALIDATE key
INSTALLATION MANUAL
Two embossed
lugs on either side
of the shield (on
the inside)
Two recesses on
either side of the
PINPAD
3300039745 R11 000 04/735
Publicité
Chapitres
Table des Matières
