Denon Professional Envoi Go Guide D'utilisation page 8

Effects Chart
TO HEAR THE EFFECTS ON A CHANNEL INPUT: Adjust the FX/Aux knob for the channel and the adjust
FX Return knob. Press the FX on/off button down to turn on the effects. Use the DSP Effects knob to
choose one of the effects below:
#
1
2
3
4
5
6
7
8
9
10
11
12
13 CHORUS/ROOM 1
14 CHORUS/ROOM 2
15 VOCAL CANCEL
16 ROTARY SPEAKER
8
PRESET
PLATE 1 Simulates the reverb of a room with a long decay time.
Simulates the ambience of natural room acoustics with
ROOM 1
long decay.
PLATE 2 Simulates a plate reverb with medium decay.
PLATE 3 Simulates a plate reverb with short decay.
Reproduces the ambience of natural room acoustics
ROOM 2
with medium decay.
Reproduces the ambience of natural room acoustics
ROOM 3
with short decay.
Simulates the ambience of a grand concert hall with
HALL 1
medium decay.
Simulates the ambience of a grand concert hall with
HALL 2
long decay.
DELAY 1 Typical mono delay.
DELAY 2 Typical ping-pong stereo delay.
Classic stereo flanging effect, similar to a jet plane
FLANGER
taking off.
Modulation effect, provides a soft, ethereal sweeping
CHORUS
effect.
Typical chorus and short decay reverb effect combined
together.
Typical chorus and long decay reverb effect combined
together.
Reduces the vocal in a recording.
Note: This effect works best to reduce vocals that were
originally recorded in mono and placed center in the
stereo mix.
Simulates a typical 1960's rotary speaker effect.
DESCRIPTION