Rear Panel - Denon Professional Envoi Go Guide D'utilisation

Rear Panel

1. Battery Level: These LEDs show the state of the
battery and when it needs to be recharged. Battery life
varies based on volume and usage.
2. Speaker Outputs: Connect these outputs to the Envoi
Go speakers with the included speaker cable.
3. Power Switch: Turns Envoi Go on or off.
4. Fuse: If the fuse needs replacing, use a fuse rated at
100~240V / T4AL 250V.
5. Power Cable (IEC): Connect the included power cable
here.
IMPORTANT: When the battery charge
light indicator illuminates, this indicates
that a charge is required. For a full
charge, turn off the device and charge for
6 hours, or until the green light indicates
a full charge.
IMPORTANT: To maximize battery life, it
is important to charge the unit regularly.
IMPORTANT: When the red LED above
the LOW battery level
illuminated, begin to charge immediately.
Never store Envoi Go with a low charge.
In addition, never store Envoi Go when
the power switch is in the ON position.
Ensure the unit is always turned off
before storage, for any length of time.
2
3
4
5
indicator is
1
7