Connection And Operation - excite fSpectrum+ Mode D'emploi

Maintenance
To ensure the best possible performance with optimal operation, the lamp should be kept clean
and dry. In particular, dust and other particles can settle in the heatsink (1), which could have
impact on the cooling performance and thus on that rated lifespan. Never use chemicals or solvents
to clean. Use a slightly damp cloth and clean the top and bottom of the lamp as soon as be dirt
becomes visible.
Hanging the f/iSpectrum+ modules
Each f/iSpectrum+ module can be suspended individually using the supplied suspension cables (2). In
order to hang a light, clamp one cable loop into the left and the other into the right groove (3) of the
bottom side of the heatsink and use the cable loop as a suspension point. The lamp can be angled when
individually hanging in the hanging ropes.
Another possibility is to place the modules on the f/iSpectrum+ rail system (4), which is specially designed
for hanging multiple f/iSpectrum+ modules. The rail system shall be mounted on the anticipated suspension
points (in total 4) of the side plates of the rails (5).
IMPORTANT: Always secure the modules in all hanging variations against falls.

Connection and operation

IMPORTANT: Always use the included power supply. Operation with another power supply than
the included may lead to failure of the f/iSpectrum+ module. Prior to connecting the f/iSpectrum+,
make sure that the power plug of the external power supply (6) is unplugged from the power
socket.
Please note the order:
- First connect the f/iSpectrum+ module to the power supply using the
plug connection.
- Last connect the power supply to the power. When removing the
cables from the mains, reverse the order to prevent damage to the unit.
To turn on the iSpectrum+ LED Grow Light, use the dimming switch (8) on the front panel. The
dimmer allows the intensification of the light output of the spectral channels GROW and the
BLOOM. To switch on the iSpectrum+, turn a dimmer clockwise along the curve up to the inscription
"MAX". Turning off is operated by turning counter-clockwise up to the inscription marked "OFF".
Powering the iSpectrum+ Grow light and switching it off, is confirmed with an audible "click" of
the dimmer switch.
WARNING: Always turn off the lamp by the dimming switch (8) and unplug the AC connection (7) before
connecting or removing the connector between the lamp and power supply (6).
PHOTOBIOLOGICAL SAFETY NOTE
WARNING: The f/iSpectrum+ has been designed and classified as a product
of hazard class 3 according to DIN EN 62471 "Photobiological safety of
lamps and lamp systems". do not stare directly into the light beam. Volatile
or short-term exposure poses a threat and causes irreversible eye damage.
Avoid irradiation of eye or skin by scattered radiation! A use in general
lighting is not permitted. Always wear protective glasses in the vicinity of
the light sources.
EN