Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Parts identification
CLEAN
DRY
CHARGE
STATUS
Protective cap
Foil frame
3 System outer foil
4 System outer foil release
buttons
5 Inner blades
6 Foil frame release buttons
4
SELECT
7 Finger rest
8 Pivot action selector
9 OFF/ON switch
LCD panel
Appliance socket
Trimmer
Trimmer handle
Adaptor (RE7-40)
Power cord
Appliance plug
Self-cleaning recharger
(Referred to as the
"Recharger".)
Detergent cartridge
Water tank
Socket
Operating environment for the self-cleaning
recharger
Operating temperature:
15-35 °C (59-95 °F)
Operating humidity:
Less than 95%
If you use the self-cleaning recharger in temperatures outside the
•
above range, the following problems may occur.
The time it takes to charge the shaver increases.
-
The recharger stops functioning.
-
The lifespan of the rechargeable battery shortens. (Only when
-
you use the recharger in lower temperatures.) In this case, the
indicators on the LCD panel will blink twice every second.
If the indicators on the LCD panel do not glow, wait for a short
•
while until it glows.
Depending on the environment, the shaver may not dry even if
•
you select a course that includes the "Dry" function. In this case,
wipe off any drops of water with a dry cloth.
Water tank cap
Clean lamp
Dry lamp
Charge lamp
Status lamp
Select button
Cleaning tray
Water level
Publicité
Table des Matières
