Technical Data; Scope Of Delivery; Assembly; Setting-Up And Adjustment - holzkraft HWS 720 K Traduction Des Instructions D'origine

7. Technical Data

Article Number
Construction measurements:
Total length
Total width
Total height
Rocker support
Saw blade ø
Idle speed motor
Cutting speed saw blade
Weight
Power unit
Motor
Input power P1
Output power P2
Operating mode
Rated current
Work information
Cutting height Spar
Turning cut
Piece of wood
Specific noise values
The according to the EN 23746 for the sound pressure level resp. EN 31202 (correction factor k3 after supplement A.2 from EN
31204 calculated) for the sound pressure level on the working site ascertained noise emission value amounts under the foundations
of ISO 7904 supplement a performed working conditions to.
Sound pressure level in dB
Idle L / Processing L
WA WA
Sound pressure level on working site in dB
Idle LqAeq / Processing LqAeq
The specified values are emission values and therefore should not at the same time be reliable working site values. Although there
is a correlation between emission and immision levels, it cannot unfailingly be derived if extra precautions need to be taken or not.
Factors, which influence the actual availabe immusion value on working site, include the peculiarities of working area, other sources
of noise, e.g. the number of machines and other adjoining processes. The allowed working values could vary from country to coun-
try. However, the information should qualify the user, to be able to make an estimation of the dangers and risks.

8. Scope of delivery

• Rocker circular saw
• Allen key or open-end wrench
• Locking pin
• Operating instructions

9. Assembly

The machine is supplied completely assembled them, and is therefore ready to use.

10. Setting-up and adjustment

• Please pay attention that your rocker circular saw is set up stable and on a leveled floor.
• The workplace must be well lit.
• There should be no obstacles to the machine.
GB
HWS 720 K
5965721
mm
mm
mm
mm
mm
1/min 1380
m/sec 52
kg 95
V/Hz 220 - 240 / 50
kW 3,0
kW 2,1
S2 / 15 min
A 13
max. mm
min. mm
max. mm
max. mm
Reserve technical changes!
HWS 720 K
5965720
1270
730
1130
670
700
1400
52
89,5
380 - 420 / 50
4,5
3,4
S2 / 15 min
10
240
60
250
370 x 240
105 / 107
95 / 97
HWS 720 BK
5965722
1400
52
114
petrol
9 kW / 12,2 PS
page: 23