Function "Pip Setting - Renkforce 1243795 Mode D'emploi

c) Function "PIP Setting"
Here, you can set resolution and image quality for the screen/DVR when recording the camera image
video. The setting can be made separately for each of the four radio cameras (channels).
The higher the resolution or quality, the more memory is needed for the video recording.
• After calling the function, use the control buttons "S" or "F" (9) to select one of the four cameras ("Cam-
era 1" ... "Camera-4").
• Push the "OK" (8) button.
• Use the control buttons "G" or "►" (9) to switch between the settings for the resolution ("Resolution
Size") and the video compression/video quality ("Quality").
• Use the control buttons "S" or "F" (9) to select the respective setting; then push the button "OK" (8). A
check mark to the right shows the current setting.
"Resolution Size" = "High"
"Resolution Size" = "Low"
"Quality" = "Top"
"Quality" = "High"
"Quality" = "Medium"
"Quality" = "Low"
• Push the "MENU" (5) button to accept the settings. Push the "MENU" (5) button again to leave the setting
menu.
High resolution
Low resolution
Best image quality
High image quality
Medium image quality
Low image quality
67