Submenu "Record; Function "Timer Recording - Renkforce 1243795 Mode D'emploi

12. Submenu "Record"

• As described in chapter 10, briefly push the button "MENU" (5) to call the OSD menu. Then use the con-
trol buttons "G" or "►" (9) to select the submenu "Record" and push the button "OK" (8) to confirm.
• Use the control buttons "S" or "F" (9) to select the desired function now. Confirm the selection with
"OK" (8).
a) Function "Timer Recording"
The screen/DVR can record the camera image automatically at specific times, e.g. on weekend nights from
midnight to 6 AM or during the day from 8 AM to 4 PM.
Several time windows can be programmed for automatic recording. However, observe that they
do not overlap.
Setting up/changing time windows
• After the first call of the function, only "New schedule" appears in the LC display.
If time windows for automatic recording are already programmed, they appear in a list below.
Use the control buttons "S" or "F" (9) to select the desired time window and use the button
"OK" (8) to get to the setting window.
• After programming a new time window for automatic recording, use the control buttons "S" or "F" (9)
to choose between "New schedule" and push the button "OK" (8).
• Use the control buttons "S" or "F" (9) to switch between the different setting options now and to change
the values with the control buttons "G" or "►" (9).
"Camera"
"Date"
Record single camera image ("Camera-1".... "Camera 4")
Record all camera images ("All cameras")
Choose the date for one of the next days
On workdays only ("Mon ~ Fri" or "Mon ~ Sat")
On weekends only ("Sat ~ Sun")
On a specific week day ("Every Mon".... "Every Sun")
"Every Day"
61