Iberspa Oasis 40 Manuel D'utilisation Et D'installation page 23

In order to seal the lip of the Spa to the foundations, use elastic silicone special forwater
installations.
Once the Spa has been correctly fitted, finish the installation taking into account that you
must leave a free passage of at least 400mm around the shell for possible maintenance
works. Never place elements that may touch the body of the Spa, pipes or accessories in
this area. Leave a trapdoor or accessway around the Spa for maintenance.
Never fill in the Spa's upper edge with cement or any other material that may have an
expansion / contraction different to that of the Spa shell.The Spawould end up cracking.
Never fill in with concrete the Spa's pipes or accessories.
700
Max 20mm
700
ENG
114
115
116
23