Assembly / Operation - Hailo ProfiStep Uno Manuel D'utilisation Et D'installation

6. Assembly / operation

6.1 Handling the single ladder
Set up single ladder on a flat, solid surface and secure
before using, e.g. tie up or attach suitable devices to
ensure stability.
6.2 Handling the extension ladder
The extension ladder can be adjusted in height by sliding
the extension section [A-2] in and out.
Adjusting and locking the extension ladder:
The ladder or a ladder element is locked on a ladder
rung using the pair of locking hooks [D]. The anti-lift
security device [D-1] on the locking hock secures the
ladder against unintentional movement and serves as a
transport lock.
1. Pull up on the anti-lift security device [D-1] on
the locking hook [D] and lift the ladder slightly to
unlock it.
After unlatching, the extension section [A-2] can be
moved to another position along the guide bracket
[E].
2. Before using the ladder, the locking hooks must
be correctly positioned on the ladder rung and the
anti-lift security device [D-1] must be automatically
engaged.
With the longer ladder lengths, the ladder elements are
best moved into the desired position on the ground and
set up with 2 persons if necessary.
Set up extension ladder on a flat, solid surface and
secure before using, e.g. tie up or attach suitable devices
to ensure stability.
3.
After using the extension ladder, securely re-lock the
ladder elements using the locking hook [D] at the lowest
ladder rung.
6.1
6.2
GB
25