Menu Items in the Setup Menu
Sequence of
The menu items of the Setup menu are described in ascending order.
menu items
You can scroll through menu items by pressing the 'Up' key.
OFFSET
Unit
Setting range
Factory setting
*
CASH
Unit
Display range
Factory setting
SLEEP LCD
Unit
Setting range
Factory setting
1 / 5 / 10
NEVER
MWh
+ or - (sign) / 4-digit (correction value) / decimal point*
0
Once you have entered the 4-digit correction value, the navigation arrows switch
from 'up' and 'down' to 'left' and 'right.'
Use the 'Left' and 'Right' keys to move the decimal point to the desired location and
press the 'Enter' key.
-
Currency / Charge rate/kWh
EUR
Minutes
1 / 5 / 10 / NEVER
1
If no key is pressed, the display turns off after 1, 5 or 10 minutes.
The display is re-activated by pressing any key.
The display does not turn off in sleep mode.
Correction value setting for the Total ener-
gy display
The correction value defined is added to
the power data sent by the inverters in the
'ALL TOTAL' display mode.
Currency setting and rate for invoicing the
energy supplied
Time value setting for the sleep mode
The display turns off after the time has ex-
pired to save battery power.
71