General; Device Concept; System Requirements - Fronius Personal Display DL Instructions De Service

General

Device concept

The Fronius Personal Display DL can be used to display real-time power data from one or
more inverters from any location within range of the device.
The Fronius Personal Display DL also functions as a datalogger.
The recorded data are then analyzed using Fronius Solar.access.
The Fronius Personal Display DL can show power data from up to 15 Fronius inverters.
The various display modes can show power data for the entire system or for each individual
inverter.
The Fronius Personal Display DL is powered via a battery or the power supply included
with the device.
System require- The Fronius Personal Display DL can be used with up to 15 of the following Fronius invert-
ments ers:
-
-
-
-
-
Different inverter types can also be combined.
The following are required to send data to the Fronius Personal Display DL
a)
b)
The Fronius Personal Display DL can be operated using a Fronius IG inverter with serial
number 14490001 or above.
Fronius IG inverters with serial number 14490001 or above also require a Main CTRL Soft-
ware Version 2.05.00 or higher.
The inverter software can be updated:
-
-
-
The datalogging function is not available when using a Fronius Personal Display DL Card
with a Fronius IG inverter.
A Fronius Personal Display DL Box must be connected to a Fronius IG inverter to enable
the datalogging function.
When the Fronius Personal Display DL is configured with the Fronius Personal Display DL
Card, the Fronius Personal Display DL does not log data if another data logger is present
in the system (e.g., Fronius Datalogger or Fronius Datalogger Web).
No other data logger may be present in the system when using the Fronius Personal Dis-
play DL Box.
Fronius IG (indoor / outdoor)
Fronius IG Plus / Fronius IG Plus V
Fronius IG 300 / 390 / 400 / 500
Fronius CL
Fronius IG-TL
(only in conjunction with the Fronius Personal Display DL Box)
a Fronius Display Card with a radio antenna for each inverter
or
a Fronius Personal Display DL Box
and
a Fronius Com Card or com card function (e.g., Fronius IG-TL) for each inverter.
using the "Fronius Update Card IG"
using the "Fronius Update Package"
using the "Fronius Datalogger"
47