Establishing Power Supply - Connecting Power Supply Unit; Start-Up Phase - Setting The Date And Time - Fronius Personal Display DL Instructions De Service

Establishing pow- The Fronius Personal Display DL can also be operated using a regular wall socket instead
er supply - con- of the batteries.
necting power -
supply unit -
1
2
After the power supply unit is connected, the display runs through the start-up phase for
setting the time and date.
Afterwards, you can establish the connection to the inverters.
Start-up phase - All display elements light up for about two seconds after the power supply is established.
setting the date The Operating Status LED lights up green for about one second, then red.
and time
58
Leave the battery compartment empty
Connect the power supply unit to the Fronius Personal Display DL
Connect an appropriate power adapter to the power supply unit
1
3
2
The code for the region is displayed for
about two seconds.
The sequence for entering the date is dis-
played, the first digit of the day flashes.
Date format: DD.MM.YYYY
IMPORTANT The date and time must be
set so that the Fronius Personal Display DL
can operate as a datalogger.
Use the 'Up' and 'Down' keys to select
1
a value for the first digit of the day
Press the 'Enter' key
2
The second digit of the day flashes.