Automatic Switching To The 'Now' Display Mode; Operating Status Led - Fronius Personal Display DL Instructions De Service

Automatic If no key is pressed for 2 minutes, the Fronius Personal Display DL switches automatically
switching to the to the 'Now' display mode and the real-time output power for the entire system is displayed.
'Now' display
mode The display switches to the 'Now' display mode from anywhere within the display modes
or the Setup menu.
Operating status The operating status LED on the Fronius Personal Display DL always indicates the current
LED status of the selected inverter.
During normal operation in the 'ALL' menu, the operating status LED remains dark.
When a service message is triggered for an inverter in the system, the operating status
LED begins to flash.
LED
Lights up red
Flashes red
Lights up green
Off
For more detailed information about statuses and the meaning of the operating status LED,
please see the inverter's operating instructions.
62
Description
Service message for an individual inverter
In the 'ALL' menu:
a service message has been triggered for an inverter in the sys-
tem
Normal operation for the selected inverter
In the 'ALL' menu:
Normal system operation
For an individual inverter:
The inverter is inactive (e.g., at night)