Dimmer Function - Zafferano olimpia Série Mode D'emploi

SWITCHING ON
<1 sec
Quickly press the touch sensor to
switch on the lamp
COVER REPLACEMENT
instructions for use
SWITCHING OFF
Quickly press the touch sensor
to switch off the lamp
1-2
INDICATOR LEDS
RED LED
charging in progress
LED COVER REPLACEMENT
For more information and updates visit our website
DESIGNED BY ZAFFERANO SRL IN ITALY, MADE IN PRC.
Zafferano srl, Viale dell'Industria, 26 - 31055 Quinto di Treviso - TV - Italia
www.zafferanoitalia.com
<1 sec
When the lamp is switched on, lightly press
desired brightness. Every time you turn it
Charge the battery before initial use.
To correctly charge the lamp, we recommend that
you:
1) Connect the USB cable to the adaptor;
2) Put the plug into the electrical socket
3) Place the lamp on the charging base;
4) When fully charged, disconnect the plug from
3
the electrical socket

DIMMER FUNCTION

the touch sensor to obtain the
on, the light intensity will correspond to
the previously set intensity.
CHARGE
BLUE LED
the battery is charged, it is
advisable to disconnect it
from the power charger
GLASS INSTALLATION
4