Switching Off; Dimmer Function; Indicator Leds - Zafferano swap mini Mode D'emploi

INSTRUCTIONS FOR USE
SWITCHING ON
Quickly press the touch sensor to
switch on the lamp.
<1 sec
CHARGE
Charge the battery before initial use.
To correctly charge the lamp, we recommend that
you:
1) Connect the USB cable to the adaptor;
2) Put the plug into the electrical socket
3) Place the lamp on the charging base;
4) When fully charged, disconnect the plug from the
electrical socket.

INDICATOR LEDS

PERMANENT RED LED
the battery charge is lower than 20%,
charging is recommended.
When the charge is depleted (1%), the lamp
does not switch on but emits three white flashes
as an alert to charge
DESIGNED BY ZAFFERANO SRL IN ITALY, MADE IN PRC • Zafferano srl, Viale dell'Industria, 26 - 31055 Quinto di Treviso - TV - Italia • For more information
and updates visit our website • www.zafferanoitalia.com

SWITCHING OFF

Quickly press the touch sensor
to switch off the lamp.
<1 sec
1-2
FLASHING RED LED
charging in progress

DIMMER FUNCTION

When the lamp is switched on, lightly press
the touch sensor to obtain the
desired brightness. Every time you turn it on,
the light intensity returns to 100%.
3
PERMANENT BLUE LED
the battery is 100% charged,
disconnection from the power charger
is recommended
4