Weka 600.0618.00.20 Notice De Montage, D'utilisation Et D'entretien page 6

Warranty terms of weka Holzbau GmbH
We guarantee the function of our products for 5 years from the date of delivery based on the following
conditions – however only on the wooden parts of our products (hereinafter weka product) and not on
connected components or parts of the weka product made of another material besides wood. Within the
warranty period defective parts or missing parts of the product or the product itself will be replaced at our
discretion. The warranty extends only to the free-of-charge replacement of the respective faulty or defective
wooden part. The warranty does not cover any consequential or additional costs, in particular no delivery and
installation or modification costs.
The warranty is void in case of:
- failure to follow the assembly instructions,
changes (additions or modifications) made to the product diverging from the assembly instructions,
-
- load limits (e.g. snow load, etc.) having been exceeded,
the weka product having been installed on an incorrect foundation or floor plate, etc., in particular in
-
case of violation of the rules of architecture,
lack of or insufficient care of the wood (maintenance measures such as preservation or painting of
-
the wood),
wind speeds stronger than force 7 (moderate gales), natural catastrophes or brute force having
-
caused the damage to the weka product,
- the deficiency consisting in changes which are typical for wood, such as discoloration, formation of
cracks, warping, shrinking, swelling or similar normal effects on the material "wood".
Warranty claims must be accompanied by the original packing slip and the original sales receipt and must be
submitted within the warranty period in writing or by fax or e-mail. A further prerequisite for a claim is the
immediate notification of the defect or damage in the form of pictures and a written description of the defect.
Address all warranty claims to:
weka Holzbau GmbH, Johannesstraße 16, 17034 Neubrandenburg
Fax: 0395/42908-83; E-mail: info@weka-holzbau.com
NOTES – ROOF TILES
•
Prior to mounting, the roof tiles are to be stored undercover and out of direct sunlight. This applies in
particular to white foils. Heat may build up under a stack of tiles leading to distortion and discoloration of
the tiles due to the burning glass effect.
•
Roof tiles must not be mounted in temperatures below +5°C or above 30°C.
•
In order to guarantee the impermeability of your car port, silicon is to be used when laying the roof tiles
(not included in the delivery.
•
The roof tiles are to be pre-drilled with holes with a diameter = 8 mm.
•
Use the spacers according to the.
•
Please note that the screws are not to be screwed down too tightly in order to guarantee the function of
the tiles.
•
Note: No false floor may be installed or thermal insulation provided below the roof tiles. There must be
adequate ventilation beneath the roof tiles.
•
The maximum snow load for this carport is 1,25 kN/m², resulting in a maximum permissible snow depth
of 60 cm. If the snow depth exceeds this amount, the roof must be cleared.
Techn. Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.
© Copyright HRB 3662
6