Conrad 18 18 18 Notice D'emploi page 36

Start one of the pre-programmed lighting programs by clicking it with the mouse. With the
symbols in the area on the right you can:
• Changing the brightness
• Change speed
• Stop/start a light program
• Switch the controller on/off
To programme a lighting program yourself, select "User-sequence 1" or "User-sequence 2".
In the upper left of the window you can set the desired number of colour changes (in the figure
above 5 colour changes are selected). Every colour change allows the intensity of the basic
colours (RGB), the hold time and the cross-fade time.
The light programs you have created can be saved on your computer or reloaded and of course
copied to the controller.
The program folder on the hard drive contains several light program examples.
36