Requirements Of The Installation Site; Technical Data - Maico WR 310 Série Notice D'installation

8 Requirements of the installation site

310/410 320/470
160 Flat Trio
● Ambient temperature + 10 °C to + 40 °C.
● Space of at least 70 cm in front of the unit.
● Note the space needed for additional com-
ponents.
310/410 320/470
● Plan in space for condensate outlet.
● Fit a siphon, pointing downwards by at least
2 %, and open drip funnel for condensate
drainage.
● A level and hard wall surface is needed for
wall installations (to avoid vibration noise).
Trio
● A level and hard ceiling/wall surface is
needed for ceiling/wall installations (to avoid
vibration noise).
● Firmly screw down ventilation unit to ceiling/
wall at the mounting supports fitted at the
face end using mounting material of a
sufficient size. Mounting material is to be
supplied by the customer.
170
170
8 Requirements of the installation site | UK

9 Technical data

Dimensions (WxHxD)
Air connections
Outside air filter
Exhaust air filter
Condensation drain
Protection class
Degree of protection
Outside air temperature - 20 °C bis + 50 °C
Max. permissible humid-
ity in installation room
(20 °C)
Rated voltage
Power frequency
310/410 320/470
,
841 x 857 x 598 mm
170
595 x 820 x 435 mm
Trio
LZ, QZ AL
und QZ AR:
600 x 210 x 1000 mm
Trio
QD AL, QD AR:
650 x 220 x 1100 mm
160 Flat
(LxBxH)
1260 x 582 x 230 mm
310/410
DN 160 mm
320/470
DN 160 mm
170
DN 125
160 Flat
DN 125/160
Trio
DN 125
F7
310/410
G4
320/470
G4
170
G4
160 Flat
G4
Trio
M5
310/410 320/470
1½"
170
Steckmuffe 3/4"-Schlauch
1
310/410 320/470
Trio
IP 40
170 160 Flat
IP 00
70 %
230 V AC
50 Hz / 60 Hz
43