Instructions For Use; Setting The Clock; Safety Lock - Teka TMW 18 BIH Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Instructions for use

Warning: Never use the microwave when it is
empty, i.e. when it does not contain any food.
Look at the diagram and proceed as follows:
1. Plug the appliance into an appropriate electrical
socket (see tips on the last page).
2. To open the door, press the OPEN BUTTON.
The inside lighting of the microwave comes on.
3. Place the container with the food on the plate.
4. Select the function and the cooking time,
according to the description contained in the
following sections.
5. Close the door and press the START-Button
6. The microwave starts to function and the
screen displays the remaining operating time.

Setting the clock

1. When you are not using the oven press the
CLOCK button until the numbers start to flash.
2. Enter the hours with the help of the ROTATING
BUTTON, turning it in any direction.
3. Press again the CLOCK button to set the
minutes.
4. Enter the minutes with the help of the
ROTATING
BUTTON,
direction.
5. To finish, press the CLOCK button again.
IMPORTANT NOTE: To hide the clock, briefly
press the CLOCK button. To show the clock
again, repeat this procedure.

Safety lock

The safety lock can be activated and deactivated
by pressing the safety lock button for 3 seconds
while the microwave is on stand-by position. When
this happen, all the functions are deactivated and
on the screen displays 4 horizontal middle size
bars on each digit and the dots keep flashing.
turning
it
in
any
EN
29

Publicité

Table des Matières
loading

Table des Matières